Ultrafine Mill
SCM series ultrafine mill is on the bases of our company’s production experience for more than 15 years. We absorb advantags from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This page is about the following about SBM ultrafine mill.
Application of Ultrafine Mill:
TopSCM Series Ultrafine mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, fertilizer and mining etc. It is mainly used for grinding the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, dolomite, limestone, kaolin, bentonite, steatite, mica, magnetite, iolite, diatomite, pyrophillite, attapulgite, vermiculite, meerschaum, gypsum, alunite, barite, graphite, phosphate ore, fluorite, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.
Feature of Ultrafine Mill:
Top1. Reliable and high safety.
2. High efficiency, high capacity and low cost
3. Easy adjustment of product fineness
4. Clean, environmental protection and pollution and noise are lightened by using deduster.
5. Finished size can reach to d97≤5μm.
6. High using rate of spare parts.
Technical Data of Ultrafine Mill:
Top| Model | Speed of bucket (r/min) | Weight of ultrafine (t) | Size of feed opening (mm) | size of outputting feed (mm) | Production (t/h) | Power (kW) | Weight (t) |
| Ф900×1800 | 38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 3.6 |
| Ф900×3000 | 38 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 4.6 |
| Ф1200×2400 | 32 | 3.8 | ≤25 | 0.075-0.6 | 1.5-4.8 | 45 | 12.5 |
| Ф1200×3000 | 32 | 5 | ≤25 | 0.075-0.4 | 1.6-5 | 45 | 12.8 |
| Ф1200×4500 | 32 | 7 | ≤25 | 0.075-0.4 | 1.6-5.8 | 55 | 13.8 |
| Ф1500×3000 | 27 | 8 | ≤25 | 0.075-0.4 | 2-5 | 90 | 17 |
| Ф1500×4500 | 27 | 14 | ≤25 | 0.075-0.4 | 3-6 | 110 | 21 |
| Ф1500×5700 | 27 | 15 | ≤25 | 0.075-0.4 | 3.5-6 | 132 | 24.7 |
| Ф1830×3000 | 24 | 11 | ≤25 | 0.075-0.4 | 4-10 | 180 | 28 |
| Ф1830×6400 | 24 | 23 | ≤25 | 0.075-0.4 | 6.5-15 | 210 | 34 |
| Ф1830×7000 | 24 | 25 | ≤25 | 0.075-0.4 | 7.5-17 | 245 | 36 |
| Ф2200×5500 | 21 | 30 | ≤25 | 0.075-0.4 | 10-22 | 370 | 48.5 |
| Ф2200×6500 | 21 | 30 | ≤25 | 0.075-0.4 | 14-26 | 280 | 52.8 |
| Ф2200×7500 | 21 | 33 | ≤25 | 0.075-0.4 | 16-29 | 380 | 56 |
| Φ2200×9500 | 21 | 38 | ≤25 | 0.074-0.4 | 18-35 | 475 | 62 |
Notice: Any change of Ultrafine Mills technical data shall not be advised additionally.
Get Price of Ultrafine Mill:
TopPlease input your information in below form, we will contact you as soon as possible!
Relative Products:
TopJaw Crusher, Cone Crusher, Ball Mill, Vertical Mill, Vibrating Screen, Vibrating Feeder
| Tel: | 0086-21-58383058 |
| Fax: | 0086-21-58383058 |
| Email: | mill@unisbm.net |
